DALMATIAN Invento™ is widely used in the process of rehabilitation. It is recommended for not only children but also young people.

It is used as a rehabilitation chair during adopting the sitting position and then as a static standing frame in the further process of rehabilitation. Besides, it can be a lying function during the whole process. This device is equipped with the gas spring thanks to which both therapists and care takers can put the child in upright position without removing him from the chair.

This multifunctional device completes the process of rehabilitation due to adjustment and equipment. Upright standing may be performed from to 90°. Moreover, safety vest and pelvic belt are equipped with innovative Hold & Pull™ system which allows for quick and precise stabilization of the child in the device.

As far as this product is concerned, it is created from ecologic materials and it is hand painted.

wyrob medyczny


Stable structureStable structure
The device ensures adequate stability and safety of user.

Eco-friendly materialsEco-friendly materials
We use only human and environment friendly materials.

Pneumatic supportPneumatic support
Gas spring helps in proper tilt angle adjustment of the device.

Bucket SeatTilt in space
It is possible to change the tilt angle of the seat.

3D foot buckles3D foot buckles
Footrests with 3D adjustment allow for smooth foot setting in all directions.

Efficient verticalizationEfficient verticalization
The use in the product of an innovative four-bar linkage, supported with the gas spring, provides efficient lifting of the user into upright standing position.

24 months warranty24-month warranty
We offer 24-month warranty on the product. We also provide after sales service.

3 in 13 in 1
The product has 3 utility functions for use in 1 single device: chair, standing frame and lying function.

Quiet operationQuiet operation
Using of gas spring or electric actuator in the product ensures quiet operation.

Grasp and pullHold & Pull™
A special system used in our vests and hip belts. The ergonomic D-shaped grip makes it easy for the user to adjust the product quickly and comfortably. The system is designed also for people with hand dysfunctions.

Spacer upholsterySpacer upholstery
The device is equipped with breathable, hypoallergenic 3D spacer fabric. Now you can be sure that the skin stays dry for longer!

Easy to useEasy to use
Thanks to the use in the product of an innovative four-bar linkage it is very user friendly.

Lightweight constructionLightweight construction
The use in the product of an innovative four-bar linkage, supported with the gas spring makes it more lightweight in comparison to similar devices.

Stander position

Positioning chair

Lying position


It is recommended in the following cases:

  • Cerebral palsy – various types and forms.
  • Brain and spinal cord injuries with lower limbs paralysis and weakness, balance and motor coordination disorders with different etiology.
  • Demyelinating disease (e.g. multiple sclerosis – SM).
  • Meningocele.
  • Muscles diseases with weakness and paralysis (dystrophy, myasthenia gravis, myositis).
  • Genetic disorders.
  • Degeneration and neurological diseases.
  • Other condition connected with muscles weakness, paralysis and musculoskeletal disorders.
  • After head and spinal cord injuries and spine trauma with paralysis and paresis.



Symbol Measurement Unit Size 1 Size 2 Size 3
W Indicative user height* [cm] < 100 80 – 130 100 – 165
A Seat width [cm] 33 36 45
L Seat depth [cm] 16 – 25 20 – 31 27 – 42
C Headrest height [cm] 37 – 52 42 – 53 49 – 64
C1 Backrest height [cm] 28 35 40
E Backrest width [cm] 13 – 23 18 – 26 18 – 32
F Footrests length [cm] 15 – 34 15 – 37 15 – 45
Knee supports spacing [cm] 18 – 26 21 – 29 25 – 37
Knee supports height [cm] 19 – 46 28 – 51 19 – 58
Footplate length [cm] 19 22 25
L1 Abduction block adjustment (from backrest) [cm] 0 – 17 5 – 25 7 – 30
Tray height [cm] 67 – 80 74 – 97 95 – 112,5
Stander tilt angle [°] -10 – +85 -10 – +85 -10 – +85
X Backrest tilt angle [°] 90 – 180 90 – 180 90 – 180
Z Footrests tilt angle [°] 90 – 180 90 – 180 90 – 180
Maximum user weight [kg] 25 45 60

Note: Measurement tolerance range is +/- 1 cm / ½ in.
*This measurement cannot be the main parameter while choosing the product size.
** As a part of our permanent product improvement, Akces-Med reserves the right to change design and specifications without notice. Further, not all options and features offered are compatible with all configurations. Please refer to the user instruction manual for more information.

How to measure the user – click



 Measurement  Unit Size 1 Size 2 Size 3
Width [cm] 46 50 60
Length – chair function [cm] 70 81 97
Height – chair function [cm] 96 118 138
Weight [kg] 22,5 27,5 43

Note: Measurement tolerance range is +/- 1 cm / ½ in.
Note: Approximate values, depending on the product configuration.


  • Frame with castors and brakes
  • Pneumatic spring
  • Deep adjustable seat
  • Removable and adjustable abduction block
  • Knee support
  • Backrest
  • Pelvic belt (Hold & Pull™ system)
  • Chest support (size 1, 2)
  • Independently adjustable chest and pelvic support (size 3)
  • 4-point safety vest (Hold & Pull™ system)
  • Adjustable HexagonPro™ headrest
  • Forearm supports
  • Tray
  • Independently adjustable footrest
  • Innovative quadric mechanism
  • Breathable upholstery ATMO™




More about our upholsteries you can find here


Breathable upholstery – ATMO™

breath antiallergic

easy eco

Grass Size 1

Size 1

Sea Size 2

Size 2

Latte Size 3

Size 3

Red optional


Waterproof upholstery – HYDRO™

easy water eco durab

Green Grass Optional

Green Grass

Blue Sea Optional

Blue Sea

Brown Sugar

Brown Sugar

Hot Red Optional

Hot Red



Medical upholstery – MEDICUS™

water steam fire

SANMED Standard

Med Sea

SANLATTE *Optional

Med Skin

SANBLUE *optional

Med Blue

*Optional colors available for special request. Production time ca. 14 days.

Real upholstery colors may differ from the presented images.