CAT I INVENTO™

CAT I INVENTO™ is a functional pediatric standing frame designed to support children in adopting and maintaining an upright position safely and comfortably. The device promotes psycho-physical development while enabling active participation in therapy, play, and everyday activities.

The stander offers both anterior and posterior standing options, allowing the position to be adjusted according to the child’s individual needs and stage of rehabilitation. Tilt angle adjustment up to 90° enables the transition from lying to standing — without removing the child from the device.

An extensive system of belts and supports — including adjustable foot supports, knee supports, pelvic and chest supports, armrests, and headrest — ensures precise body positioning and proper stabilization.

The device is intended for children with a height range of 80–110 cm who require support in maintaining upright or trunk stabilization.

This is a medical device. Use it in accordance with the user manual or the label.

The product shown may include optional equipment. Details of the standard equipment can be found in the “Standard Equipment” section below.

Special Features

Stable structure Stable structure
The device ensures adequate stability and safety of the user.

Quiet operation Quiet operation
Using a gas spring in the product ensures quiet operation.

Spacer upholstery Spacer upholstery
The device is equipped with breathable, air-permeable 3D spacer fabric upholstery. Now you can be sure that the skin stays dry for longer.

Prone and supine standingSupine & prone upright standing
The product provides supine and prone upright standing.

Easy to use Easy to use
Intuitive way of adjustment and easy assembly.

Pneumatic support Pneumatic support
Gas spring helps in proper tilt angle adjustment of the device.

24-month warranty 24-month warranty
We offer 24-month warranty on the product. We also provide after-sales service.

Rear standing position and tilt angle adjustment

Rear standing position and tilt up to 90° – Possibility of rear positioning and smooth angle adjustment from lying position to full standing.

Chest supports with belt

Front standing position – stable forward positioning that supports therapy, activity and contact with the environment.

Therapy tray with toy container

The therapy tray provides stable support during play, learning and manual exercises. The built-in toy container increases functionality and helps extend the child’s activity time in the standing frame.

3D adjustable footrests

Lying position provides comfort, rest and a gentle introduction to standing.

INDICATIONS

It is recommended in the following cases:

  • Cerebral palsy (CP) – various types and forms.
  • Brain and spinal cord injuries of various etiologies with limb paresis, severe balance disturbances, and coordination impairments.
  • Demyelinating diseases (multiple sclerosis – MS, amyotrophic lateral sclerosis – ALS, and others).
  • Meningocele.
  • Muscle diseases with paresis and paralysis (including dystrophy, myasthenia gravis, polymyositis).
  • Genetic syndromes with limb paresis.
  • Degenerative and metabolic diseases of the nervous system.
  • Degenerative and rheumatic joint diseases.
  • Other diseases with limb paresis, paralysis, and musculoskeletal impairments.
  • After injuries, following traumatic brain injuries or spinal cord injuries with limb paresis and paralysis, particularly with quadriplegia (as part of the rehabilitation process or as permanent orthopedic support).

CONTRAINDICATIONS

During standing process, the person being stood must be observed. In case of side effects such as paleness, sweating, or fainting, joint overloading and resulting body deformations, the therapy should be stopped. Further steps should be consulted with a specialist doctor or physiotherapist who prescribed the aid.

Absolute contraindication to standing therapy is the critical condition of the user.

Relative contraindications to standing therapy:

  • resting arterial hypertension above 200/110 mmHg, pulmonary hypertension, heart rhythm disorders, unstable asthma, unstable metabolic disorders, moderate stage of heart valve disease.
  • Any condition, such as healing fracture or severe osteoporosis, that prevents weight-bearing in any way.
  • Fracture with incomplete healing, unless approved by a doctor.
  • Postoperative joint load restrictions.
  • Pain associated with standing in the stander (caused by dislocation or hip dislocation, excessive stretching of soft tissues, excessive pressure). Dislocation or dislocation of the hip joint without pain is not a contraindication.

People with significant flexion in the hip or knee joints, as well as with ankle joint contractures, may not be able to use the stander. Caution should be taken to ensure that the position in the device does not cause excessive pressure or stretching of the diseased areas of the body. In such cases, standing therapy may be contraindicated until a greater range of motion is achieved in the contracted joints.

For individuals with impaired circulatory system (resting arterial hypertension above 200/110 mmHg, pulmonary hypertension, heart rhythm disorders, moderate stage of heart valve disease); respiratory system (unstable asthma) and unstable metabolic disorders, close monitoring of the user during standing position is necessary to prevent serious complications. This includes particularly monitoring blood pressure, heart rate, and any symptoms of orthostatic hypertension.

Size Tables

Symbol Description Unit Size 1
– Indicative user height* [cm] 80 – 110
FH Headrest height [cm] 74 – 105
FU Chest supports height [cm] 51 – 75
FT Pelvic supports height [cm] 39 – 63
FK Knee supports height [cm] 16 – 40
UU Chest supports width [cm] 13 – 23
TT Pelvic supports width [cm] 13 – 22
KK Distance between knee supports centers [cm] 9 – 22
FF Distance between footrests centers [cm] 13 – 29
β1 Tilt angle [°] 0 – 90
Default footrest size – 0
Max. user weight [kg] 30

Note: Measurement tolerance range is +/- 1 cm / ½ in.
* This measurement cannot be the main parameter while choosing the product size.
How to measure the user – click

WEIGHT AND DIMENSIONS

Dimension Unit
Width [cm] 59
Length [cm] 77
Height [cm] 104 – 128
Product weight [kg] 21.5

Note: Measurement tolerance range is +/- 1 cm / ½ in.
Note: Approximate value, depending of product configuration.

As a part of our permanent product improvement, Akces-MED reserves the right to change design and specifications without notice. Further, not all options and features offered are compatible with all configurations. Please refer to the user instruction manual for more information.

Standard equipment

1 2 3 4 5 6 7 8 9 10 11 12

Head support for posterior standing and tray for anterior standing

Headrest

Chest supports

Chest safety belt

Tray for posterior standing

Pelvic safety belt

Armrests with covers

Pelvic supports

Knee supports with stabilizer

Frame with adjustable tilt angle for anterior and posterior standing

Thermoformed foot supports (Size 0) with 2-point foot stabilizing straps

Wheels with brakes

 

Accessories

Positioning

Storage

COLOURS

More about our upholsteries you can find here

 

Breathable upholstery – ATMO™

breath antiallergic easy eco

Sea

Sea

Sea

Grey

 

Real upholstery colors may differ from the presented images.

Multimedia

​

Downloads

Skip to content